The M30, 50 & 100-series is a mid-air projection system available in various diagonal display areas (4:3 aspect), 30" to 100". The Heliodisplay's projected image starts to hover a few inches above the unit and continues to distance equivalent to that image ratio and size.  Heliodisplay images are unique and offer many advantages over existing displays due to their non-physical floating characteristics and are visible under normal to controlled lighting such in an office or corporate center. Images or video play directly from a computer or DVD player using a standard video or computer cable.  Since the source is a projection source, any computer format material (avi, jpeg, mov files) can be used to display, but using specific content can be optimized for the intended use. No special software is required. 

All Heliodisplays can be shipped worldwide, at standard shipping rates. This includes all the components to start using the unit out of the box. Units weigh between 12-30kg (15lbs-68lbs), depending on model and all systems work internationally, on 90-240V 50/60Hz using very low power from 50W to 300W for the largest model.
 
LIGHTING:  Office, tradeshow lighting or lower.
CONTRAST (Environmental) : Images are free-space so contrast ratio is whatever subject is behind.
CONTENT:  While you can display any images or video, it is best to design content such as Flash, Photoshop or your desktop.
SETUP (Environmental) : The hardware is designed to be concealed so that only the floating images are visible.
 
                      
 

TO PLACE AN ORDER, OR REQUEST MORE INFORMATION, PLEASE FILL OUT THE FORM AT THE BOTTOM OF THE PAGE
 
                          
The M30 Heliodisplay multimedia projector supports up to a 30"(76cm)  viewable diagonal free-space image and includes a supplied projection source and base unit so that no additional hardware is required. The M30 black anodized metal enclosure is only under 6" tall and about 28" wide and has a one button on/off control. The base unit weighs approximately 15lbs, or less than a standard PC and uses less than a 50W light bulb. Consumption about 0.080L/hr.  M30s, M30is can typically ship within 24-48 hours, but can change, so please check availability in advance. Shipping costs are standard shipping rates.
$16,200         M30 SPECS
  
The M30i Heliodisplay is an M30 with added capabilities incorporating interactive capabilities. The M30i utilizes a self-contained optical tracking system allows 'virtual' touchscreen control to interact with floating images or video as one would on a normal touchscreen allowing clicking, dragging and dropping. You place you finger on the image and you can click on floating images or video. Software drivers are installed onto a PC and the Heliodisplay is plugged into the computer via a standard USB cable and works exactly like you would on a touchscreen in a PC environment. (1 Ghz, 1 gig RAM  5MB for drivers recommended)
$22,300         M30i SPECS
    
Software Drivers
 
Example of interaction
  
The M50 Heliodisplay multimedia solution supports up to a 50" diagonal free-space image and is available as an integratable solution.  Systems can be ceiling, wall or pedestal mounted, and are offered in 1024x768 resolution standard and with a 3000 lumen projection source. The standard configuration is pedestal mounted, although wall or ceiling are also available.  An interactive version is also available for straight forward applications. All systems include all the hardware, including the projector, cables, etc.  While all the systems can project almost any video/image (ie. mov,avi, wmv, jpeg), we recommend looking at images and photos of examples of content that is impactful.
$31,500       M50 SPECS

    /   

Lead times for the M50, are typically 2-5 days, but can change so please check availability in advance.

MORE IMAGES

   
The M100 Heliodisplay multimedia solution supports up to a 100" diagonal free-space image and is available as an integrated solution.  Systems can be wall, ceiling or pedestal mounted, and are offered in various resolutions and configurations and capable of rendering projections up to 6-8" tall or a full standing person (when wall mounted). The system weighs 68 lbs and is almost 7 feet long. Power is 300W and runs on both international and US voltages and consumption is about 0.22L/hr. This item is special order only and lead-times depend on configuration requirements.

 

 

HARDWARE ONLY (SHOWN). THIS WILL REQUIRE SETTING UP THE HARDWARE AND CONFIGURE IT ON YOUR OWN.
HARDWARE AND ONSITE INSTALLATION: INTEGRATION AND HARDWARE. INCLUDES ONSITE SET UP BASED ON THE REQUIREMENTS.
TURNKEY SOLUTION: IF YOU HAVE A VERY SPECIFIC APPLICATION USE, WE OFFER CONSULTANCY TO CREATE THE ENTIRE SOLUTION.

 

Country
Telephone
Mobile
Email
Website
Model
   Quantity Units   
Comments
Enter Code     IO2 SEC Image
First Name
Last Name
Title
Company
Company Address
City
State
Zip     
 

 


Copyright © 2007, IO2 Technology
Powered by Arc CMS